Fire Magic High Capacity Drain Pump for Ice Maker

Never Worry About Overflow Again with Fire Magic's Drain Pump for Ice Maker

Tired of dealing with overflowing ice makers and the mess that comes with it? The Fire Magic Drain Pump is the perfect solution for ensuring your high-capacity ice maker runs smoothly and efficiently, even when a floor drain isn't an option. Easily remove excess water from the melting ice.

Fire Magic Drain Pump for Ice Maker Key Features:

• Effortless Drainage: Say goodbye to water pooling around your ice maker. This powerful pump effortlessly removes excess water, preventing overflows and keeping your outdoor kitchen sparkling clean.
• Built to Last: Crafted from durable 304 stainless steel, this drain pump is designed to withstand the elements and provide years of reliable service.
• Sleek and Professional: The polished trim kit adds a touch of elegance, seamlessly integrating the pump with your Fire Magic ice maker and enhancing the overall look of your outdoor kitchen.

Imagine: No more worrying about spills, no more messy cleanups, just effortless ice production and endless enjoyment of your outdoor living space.

The Fire Magic Drain Pump: The essential accessory for the ultimate outdoor kitchen experience. Shop now with free and fast shipping.

Specifications

• Made in USA: Yes
• Manufacturer: Fire Magic
• Part Number: 3597-100
• Weight: 8 Pounds
• Overall Length: 12 Inches
• Overall Width: 12 Inches
• Overall Height: 6 Inches

FAQs

Do I need a drain pump for my ice maker?

You generally do not need a drain pump for your ice maker if the drain is positioned directly below the ice maker, allowing gravity to effectively drain the water. The drain line must also be properly sloped, typically with a drop of 1 inch per 48 inches of run or 1/4 inch per 12 inches of run. Additionally, the drain line should be free of any low points where water can accumulate and potentially cause issues.

Note: These are general guidelines. Always refer to your ice maker's manual for specific instructions and recommendations.

What is the difference between a gravity drain and a drain pump on an ice maker?

The primary difference between a gravity drain and a drain pump on an ice maker lies in how they handle water removal.

Gravity Drain:

• Relies on gravity to move water downhill to a nearby floor drain. 
• Requires the drain to be positioned significantly lower than the ice maker.
• Simpler and often less expensive.

Drain Pump:

• Uses a small pump to actively push water upwards or over longer distances to a drain.
• Offers greater flexibility in placement, allowing installation where a gravity drain is not feasible.
• Typically more expensive and may require additional maintenance for the pump.

Essentially, a gravity drain is a passive system, while a drain pump is an active system that provides more installation options but comes with a higher initial cost and potential for increased maintenance needs.

How does an ice maker drain pump work?

An ice maker drain pump works by using a small motor to actively push water upwards or over longer distances to a drain.  

Here's a simplified breakdown:

1. Water Collection: Melted ice water or excess water from the ice-making process collects in a reservoir within the ice maker.
2. Pump Activation: When the water level in the reservoir reaches a certain point, a float switch or sensor triggers the pump to turn on.
3. Water Pumping: The pump uses a small motor to create pressure, forcing the water through a hose or pipe to the designated drain.
4. Water Disposal: The water is then discharged into the drain, typically a floor drain or a sanitary line.