Skip to content

RADtec X15R 47" Zero Glow Far Infrared Patio Heater (1500W/110V)

by RADtec
SKU X15-IR-RAD-HET
Original price $805.00 - Original price $1,450.00
Original price
$805.00
$805.00 - $1,450.00
Current price $805.00

Installation and Specifications Guide

Electrical Supply

110V to 120V Dedicated Circuit (13.6A). Connects to a dedicated 110V to 120V power supply. Features three remote power levels (495W, 990W, 1500W) and a 24 hour programmable timer.

Heat Footprint and Light

Covers 30 to 50 sq ft (50 sq ft indoors, 40 sq ft covered patio, 30 sq ft open patio). Slimline black anodized aluminum radiant panel emits zero visible light or orange glare while warming seated guests directly.

Mounting and Clearances

Recommended height is 7.0 to 9.0 feet (minimum 6.0 feet above floor). Includes articulated mounting brackets. Requires minimum 3 inches (150mm) from ceiling, 7 inches (200mm) from side walls, and 3 feet (1000mm) of open clearance in front.

Outdoor Weather Rating

Weather Resistant Sealed Aluminum Chassis. Engineered for covered patios, verandas, pergolas, and weather protected outdoor dining areas. Never flush or spray unit directly with water.

$805.00
Free Ground Parcel Delivery Est. arrival: Dec 02 to Dec 11
2 Year RADtec Factory Warranty Authorized dealer coverage
30 Day Return Guarantee Unused in original packaging

Transit and Delivery Standards

Your RADtec heating system is packaged in structural cartons to protect the anodized aluminum and heating elements during transit.

Stocked Inventory Verified Stock

Order verification and allocation takes 3 to 5 business days. Factory warehouse packaging takes 1 to 2 business days. Ground parcel transit takes 3 to 5 business days. Total expected delivery window is 9 to 16 business days.

Direct Doorstep Delivery

Delivered via standard parcel courier directly to your front entrance or covered porch. Automated tracking notifications are sent directly to your email upon warehouse dispatch.

Straightforward Unboxing

Single person handling under 35 lbs. The unit arrives in a protective carton that can be carried directly to your mounting location without specialized equipment.

Transit Protection Guarantee

Every shipment is fully insured against carrier transit damage. If carton distress occurs, contact our concierge team with a photograph for prompt replacement.

2 Year RADtec Manufacturer Warranty

RADtec Outdoor Heating warrants this heater to be free from defects in materials and structural workmanship under standard outdoor operation.

Heating Element Protection

Full replacement protection covering the embedded far infrared heating element, rated for 20,000 operational hours.

Anodized Aluminum Casing

Structural warranty protection covering the black anodized aluminum body against corrosion, structural distortion, and finish failure.

Internal Electronics and Controls

Certified water ingress protection for exterior exposure. Handheld remotes, digital controllers, and internal circuitry carry full coverage.

Return Standards

Complete clarity on return eligibility to give you confidence in your outdoor heating selection.

30 Day Return Window

Contact our concierge team within 30 calendar days of delivery to request an authorized Return Merchandise Authorization number.

Pristine Uninstalled Condition

The heater must remain unmounted and securely repacked in original factory protective packaging with brackets, hardware, and remotes intact.

Restocking and Freight Terms

Customer preference returns are subject to standard factory restocking and outbound freight costs. Initial transit damage reported upon arrival is replaced at zero cost.

Size and Watts: 1 Pack
Authorized RADtec Dealer
|
Certified Electrical Safety
|
Transit Damage Covered
| Trade Tiering →

For Homeowners Who Refuse to Compromise

When heating a covered patio, alfresco dining veranda, or architectural pergola, the goal is straightforward, delivering silent, zero glow radiant warmth that preserves your evening lighting ambiance.

The reality of conventional outdoor heaters falls short in refined spaces with quartz lamps that flood patios in harsh orange light, noisy blowers that stir up dust, and convective heat that rises away in evening drafts.

The RADtec X Series Zero Glow Far Infrared Heater pairs an embedded far infrared heating element inside a slimline black anodized aluminum alloy panel. Radiant waves travel directly through moving air to warm guests and furniture with zero visible light or glow.

Silent, zero glow comfort extends your outdoor season across covered terraces and pergolas without harsh red light, moving parts, or wind loss.

Engineering and Technical Specifications

Factory verified electrical parameters, thermal coverage footprint, and structural dimensions for the RADtec X15R Zero Glow Far Infrared.

1500W Zero Glow Output

Slimline anodized aluminum radiant panel projects gentle far infrared warmth across 30 to 50 sq ft with zero visible light or harsh orange glare.

Three Stage Remote Control

Wireless transmitter cycles across three calibrated power stages (495W, 990W, and 1500W) with a 24 hour programmable shutoff timer.

110V to 120V Dedicated Circuit

Standard 110V to 120V operation rated at 13.6 amps provides clean far infrared spot warmth for verandas, balconies, and covered alcoves.

47" L x 8" W x 2" D | 21 lbs Mass

Slimline black anodized aluminum alloy panel built for covered exterior installation. Articulated brackets support ceiling or wall mounting.

Delivery Inventory

Factory Inclusions and Delivery Scope

Your RADtec X15R Zero Glow Far Infrared ships inside impact absorbing packaging with factory verified hardware, controls, and structural brackets for safe exterior installation.

Architectural Foundation

  • Extruded Aluminum Housing Rigid anodized aluminum casing weighing 21 lbs (26 lbs packaged) engineered for ceiling or exterior wall mounting.
  • Thermal Shock Resistance Internal heating elements sealed against moisture contact, sudden ambient temperature drops, and airborne debris.
  • Zero Assembly Body Ships as a single enclosed architectural unit with no internal wiring or loose internal components required.

Mounting Hardware Rig

  • Articulated Mounting Brackets Factory engineered heavy gauge metal brackets allow flush ceiling placement or angled wall installation.
  • Mounting Hardware Kit High tensile bracket pins and locking nuts secure the chassis safely to overhead beams or exterior walls.
  • Clearance Guidelines Clear technical spacing templates outline required distances from combustible rafters, eaves, and ceilings.

Control and Interface

  • Wireless Remote Transmitter Ergonomic handheld controller allows comfortable heat modulation and auto shutoff programming from your chair.
  • Factory Standard Plug Heavy duty 6.5 foot power cord with grounded 3 prong plug connects directly into outdoor GFCI wall outlets.
  • Technical Documentation Comprehensive wiring guide, installation manual, and official manufacturer warranty registration card.
Structural Mounting and Electrical Notice RADtec 110V models arrive ready for immediate plug and play operation. Structural lag screws or concrete anchors appropriate for your wall or ceiling substrate should be selected during final mounting.

Why Choose the RADtec X15R Zero Glow

2 Year Residential Warranty

Backed directly by RADtec with two years of residential coverage and one year of commercial coverage protecting internal heating elements, control receivers, and extruded aluminum housing.

Aircraft Aluminum Construction

Machined from corrosion resistant anodized aluminum with weather sealed junction enclosures built for year round exterior climate exposure.

ETL and UL Electrical Listed

Independently tested and certified to North American UL and CSA electrical safety standards for residential and commercial outdoor installations.

- 110V to 120V plug in models require connection to a properly grounded exterior GFCI circuit with manufacturer specified clearances to preserve warranty protection.

INFRARED THERMAL ENGINEERING

THE RADIANT SCIENCE BEHIND RADTEC HEATING

Electromagnetic Wave Transfer
ZERO WIND LOSS
Anodized Aircraft Aluminum
CORROSION PROOF
Fanless Solid State Operation
ZERO NOISE
Dallas Texas Engineering
UL AND ETL LISTED

Targeted Electromagnetic Warmth Without Wind Loss

Conventional patio heaters rely on air convection, wasting energy by warming air molecules that immediately rise and blow away in light breezes. RADtec infrared systems emit targeted radiant waves that travel directly through open air to warm people, seating, and stone surfaces.

Engineered in Dallas, Texas, every RADtec fixture pairs high efficiency heating elements with corrosion resistant extruded aluminum housings. Each unit is individually tested for electrical integrity and thermal output prior to dispatch to ensure silent, multi season reliability.

  • Direct radiant heat transfer remains effective even in breezy open air patios
  • Extruded anodized aluminum chassis prevents rust across humid and coastal climates
  • Individually tested electrical circuits and thermal elements prior to dispatch

Why Clients Choose Lux Yard and Homes

Authorized Factory Direct Partner

Every RADtec X15R Zero Glow ships directly from authorized RADtec inventory with full manufacturer warranty protection. As a certified dealer partner, our clients receive factory sealed units, authentic mounting hardware, and direct technical support without intermediary friction.

Severe Climate Curation

Headquartered in Casper, Wyoming, we evaluate exterior heating systems through real exposure to sub zero winters and mountain winds. We curate exclusively for extruded anodized aluminum, IP rated weather seals, and 304 stainless steel that withstands harsh outdoor climates year round.

Insured Transit and Damage Protection

Precision infrared elements and extruded aluminum housings require careful handling. Every unit ships inside custom impact absorbing packaging with full transit damage coverage from warehouse dispatch to your doorstep, ensuring immediate replacement if carrier handling ever compromises a shipment.

Technical Guidance

RADtec X15R Zero Glow Guidance and Technical FAQs

Yes. The extruded anodized aluminum housing projects radiant heat forward while insulating the rear mounting surface. Using the included factory brackets maintains the required air gap between the heater body and wood rafters, tongue and groove ceilings, or stucco walls.
The RADtec X15R Zero Glow draws 13.6 amps on a dedicated 110V to 120V circuit. It includes a factory fitted heavy duty cord with a grounded 3 prong plug for immediate plug and play connection without hardwiring.
No. Unlike propane mushroom towers or forced air heaters that warm surrounding air molecules, the RADtec X15R Zero Glow emits electromagnetic infrared waves. These waves pass straight through moving air to warm people, chairs, and patio surfaces directly without dispersing in evening breezes.
No. The RADtec X15R Zero Glow operates on the far infrared spectrum just outside visible light. Its solid anodized aluminum face produces 100 percent zero light emission, preserving your architectural landscape lighting without harsh orange glare.
Every unit includes an ergonomic wireless handheld remote allowing you to cycle through three calibrated heat levels and program the built in 24 hour automatic shutoff timer from your seat without climbing a ladder.
The RADtec X15R Zero Glow is engineered for sheltered outdoor walls, covered patios, and verandas. While suitable for covered exterior use, it should be mounted under an overhead roof structure rather than left exposed to prolonged direct rainfall, and should never be sprayed or flushed directly with water.
Yes. Every RADtec shipment is fully insured from dispatch to your doorstep with immediate replacement coverage if carrier handling ever damages a unit. As an authorized RADtec dealer partner, we also honor 30 day price protection if you find the identical model advertised in stock at a lower total price by an authorized retailer.
RADtec X15R Zero Glow outdoor patio installation
Architectural Ceiling and Wall Integration

Flush Architectural Profile for Covered Terraces

Engineered to mount seamlessly along timber ceilings, covered verandas, or exterior masonry walls without intruding on your living footprint. The slim anodized chassis of the RADtec X15R Zero Glow projects downward radiant warmth across seating zones while preserving unobstructed sightlines and open floor space.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare